IntelliComm II Interface Adapter -- Allows Compool and Non-Pentair Control Systems to control IntelliFlo and IntelliPro Variable Speed and Variable Flow Pumps

The new IntelliComm^® II Interface Adapter provides automatic control of "IntelliPro" and IntelliFlo^® variable speed and flow pumps with Pentair’s Compool® systems as well as Jandy and Hayward automation controllers.

Features

• Easy installation—low voltage protocol adapter works with Compool and other control systems and draws power from the existing RS-485 communication line
• Allows control of four individual speeds or flows controlled by the Automation control system
• Can also be used to further expand the number of IntelliFlo pumps being controlled by EasyTouch® (current limit is 2) and IntelliTouch® (current limit is 8) automation control systems
• Compact and affordable

Overview:
The IntelliComm II interface adapter provides automatic control of IntelliFlo® VF , IntelliFlo VS and IntelliPro® pumps. IntelliComm II is compatible with Compool®, Hayward® and Jandy® control systems. The IntelliComm II Interface adapter provides:

• Four input (9-24 VDC) program terminals (GPM/RPM 1, 2, 3, and 4) for connection to any available AUX or controlled output circuit on the automation control system circuit board. Typically, GPM/RPM 1 connects to the output Filter Pump relay terminal plug. You can also connect to the spa, pool electric heater, solar or 2-speed pump output circuit. Each of the four inputs can be used to control the IntelliFlo pump's speed or flow. NOTE: If more than one terminal input is active, the highest input number will take priority regardless of the pump setting.

• A four screw terminal connector for connection to the RS-485 IntelliFlo communication cable and power source (9-24 VDC) from the automation control system circuit board.
Note: The IntelliComm II Interface adapter will always use ADDRESS 1 to communicate with the pump.
Note: The IntelliComm II Interface adapter can be used with IntelliTouch®, EasyTouch® and SunTouch® systems, when additional pumps are required beyond the normal system capacity. All required safety devices, such as the IntelliFlo VS+SVRS (Safety Vacuum Release System) pump, are unaffected when using the IntelliComm II.

The IntelliFlo VF and IntelliPro VF pump can be selected to run at a specific US gallons per minute (GPM), for each external control input.
IntelliFlo VF: 15 - 130 GPM
IntelliPro VF:15 - 130 GPM.
The IntelliFlo VS+ SVRS, IntelliFlo VS 3050 and IntelliPro VS 3050 pump can be selected to run at a specific speed (RPM), for each external control input.
IntelliFlo VS+ SVRS: 1100 - 3450 RPM
IntelliFlo VS 3050: 400 - 3450 RPM
IntelliPro VS 3050: 400 - 3450 RPM

View the owner's manual here.

This product normally ships: within 24 hours

• Save In Your Bookmarks/Favorites

•  Tell A Friend