| Image | Description | Price | |
| PH Increaser (Soda Ash) pH INCREASER Use as needed to raise the pH level to the ideal range of 7.2 to 7.6 ppm. Slows the rapid loss of chlorine caused by low pH, and slows chlorine dissipation, so your pool uses less chlorine. Stops eye irritation, etching and corrosion caused by low pH. Contains sodium carbonate “soda ash”. Recommended dosage: 1 lb. per 10,000 gallons. Available in 5lb, 10lb and 25lb buckets -- please specify below. This product normally ships: within 24 hours … |
--> | ||
| PH Reducer (Sodium Bisulphate) pH REDUCER THE SAFER ALTERNATIVE TO MURIATIC ACID! Use as needed to lower pH to ideal range of 7.2 to 7.6 ppm. Stops eye irritation, cloudy water, and scaling caused by high pH. Boosts chlorine’s ability to fight bacteria and algae. Contains granular sodium bisulfate. Recommended dosage: 6 oz. per 10,000 gallons. Available in 6lb, 15lb and 30lb tubs -- please specify below. This product normally ships: within 24 hours … |
--> | ||
| Alkalinity Increaser (Sodium Bicarbonate) ALKALINITY INCREASER Use as needed to raise total alkalinity levels to the safe (non-corrosive) zone. Stops eye irritation, equipment corrosion, and plater etching caused by low alkalinity. Stabilizes pH balance in pool water and eliminates the demand for unusually large amounts of pH adjusters. Enables chlorine to work more effectively. Recommended Dosage: Use 1-1/2 lbs. of Alkalinity Increaser to raise the alkalinity approximately 10 ppm. Available in 5lb, 10lb and 25lb buckets… |
--> | ||
| Hardness Increaser HARDNESS INCREASER Use as needed to raise the hardness (calcium) level in your pool to the ideal range. Prevents water from becoming corrosive and damaging your pool’s plumbing and heater. Stops staining and etching of pool surfaces caused by low hardness levels. Great for use in areas where soft water is a problem. Recommended dosage: 5 lbs. per 10,000 gallons to raise the hardness approximately 40 ppm. Available in 4lb and 25lb buckets -- please specify below. This product norma… |
--> | ||
| Stabilizer/Conditioner (Cyanuric Acid) STABILIZER/CONDITIONER CUTS CHLORINE CONSUMPTION BY UP TO 25%! Stabilizer pre-conditions your pool water to make chlorine last longer. Use at the beginning of each season to protect chlorine from the sun’s damaging effects and increase its effectiveness. Also known as cyanuric acid. Available in 2lb, 4lb and 7lb containers -- please select below. Dosage: 1-2/3 lbs. per 10,000 gallons. This product normally ships: within 24 hours … |
--> |
![]()

Copyright PoolsOnly.com Inc. 2006 - 2010